Amplifiers

The DA Series professional power amplifier is designed to achieve unsurpassed performance and long-term reliability, even when operating under extreme stress. Proven amplifier technology forms the backbone of rental systems and club installations nationwide. Auditoriums, churches, hire companies and mobile DJ's are all ideal candidates for the DA Series amplifiers.



Features:

Volume control position indicators
Peak level indicators
Protect mode indicators
Fan cooled
Soft start
Short circuit and thermal protection
Inputs: Jack and Phono
Outputs: Speakon, Jack and Binding Post
Output Per Channel 250W @ 4 Ohms

180W @ 8 Ohms



Specifications:

Power Supply: 240v
Dimensions: 483 x 88 x 294mm
Weight: 12kgs

The DA Series professional power amplifier is designed to achieve unsurpassed performance and long-term reliability, even when operating under extreme stress. Proven amplifier technology forms the backbone of rental systems and club installations nationwide. Auditoriums, churches, hire companies and mobile DJ's are all ideal candidates for the DA Series amplifiers.



Features:

Volume control position indicators
Peak level indicators
Protect mode indicators
Fan cooled
Soft start
Short circuit and thermal protection
Inputs: Jack and Phono
Outputs: Speakon, Jack and Binding Post outputs
Output Per Channel (4 Ohms) 150W, (8 Ohms) 90W

Specification:

Power Supply: 240v
Dimensions: 483 x 88 x 294mm
Weight: 10.0kgs

The Zenith amplifier range from W Audio has been designed and engineered to work in any demanding installation or touring environment with military endurance.

Oversized multi-speed fans and large heat sinks will keep the output stage cool even under the most extreme conditions. Service and maintenance is easy as the internal architecture is laid out for easy access by qualified technicians. Made with a heavy gauge welded steel chassis with vibration proof fittings and an emphasis on over engineering guarantees years of trouble free service in demanding environments.

Many amplifiers distort with both channels loaded and driven before they hit full output power. Even some expensive "brand" name amplifiers will do this when presented with multiple drivers at low impedance (inductive load). The dirty signal makes it sound loud, but it will reduce speaker life. The Zenith amplifiers are designed to handle low impedance and inductive loads and when driven to excessive levels will "soft clip". The switchable limiter system is controlled by a high speed VCA chip that will limit both PEAK and RMS power to prevent clipping of the output stages.


Features:


Input Connectors: Balanced XLR
High pass line out
Low pass line out
Full range line out
Output connectors: Neutrik Speakon & Binding post
Bypass: Low pass filter - High pass filter

Indicators: Protect, Signal, Active and Clip
Stereo, Parallel and Bridge
Circuit Breaker Protection


RATED OUTPUT POWER
1600W x 2 (4 ohms)

1000W x 2 (8 ohms)


BRIDGE MODE MONO
3000W (8 ohms)

Specification:



Power Supply: 240v

Dimensions:483 x 90 x 462mm

Weight: 23 kgs

Elite Series amplifiers are designed for durability and reliability without disregarding professional sound quality. The Elite series exhibits very low levels of noise and distortion. Each Amplifier is designed for rugged use and intended to last because all components are of the highest quality. Professional power-handling capabilities and exceptional low-end response make this amplifier an ideal choice for installations and touring applications that demand the finest audio quality.

Features:


Input Connectors: Balanced XLR, 6.35mm Jack & 5 Pin Barrier Strip
High pass line out
Low pass line out
Full range line out
Output connectors: Neutrik Speakon & Binding post
Bypass: Low pass filter - High pass filter

Indicators: Power, Signal and Clip
Stereo ( 2 ~ 8 ohm ) - Bridge ( 4 ~ 16 ohm )
Circuit Breaker Protection


RATED OUTPUT POWER
2 ohms - 900w x 2
4 ohms - 675w x 2
8 ohms - 400w x 2


BRIDGE MODE MONO
4 ohms - 1800W
8 ohms - 1250W

Specification:

Power Supply: 240v

Dimensions: 483 x 90 x 380mm

Weight: 20 kgs

The Zenith amplifier range from W Audio has been designed and engineered to work in any demanding installation or touring environment with military endurance.



Oversized multi-speed fans and large heat sinks will keep the output stage cool even under the most extreme conditions. Service and maintenance is easy as the internal architecture is laid out for easy access by qualified technicians. Made with a heavy gauge welded steel chassis with vibration proof fittings and an emphasis on over engineering guarantees years of trouble free service in demanding environments.

Many amplifiers distort with both channels loaded and driven before they hit full output power. Even some expensive "brand" name amplifiers will do this when presented with multiple drivers at low impedance (inductive load). The dirty signal makes it sound loud, but it will reduce speaker life. The Zenith amplifiers are designed to handle low impedance and inductive loads and when driven to excessive levels will "soft clip". The switchable limiter system is controlled by a high speed VCA chip that will limit both PEAK and RMS power to prevent clipping of the output stages.

Features:


Input Connectors: Balanced XLR, 6.35mm Jack & 5 Pin Barrier Strip
High pass line out
Low pass line out
Full range line out
Output connectors: Neutrik Speakon & Binding post
Bypass: Low pass filter - High pass filter

Indicators: Power, Signal and Clip
Stereo ( 2 ~ 8 ohm ) - Bridge ( 4 ~ 16 ohm )
Circuit Breaker Protection


RATED OUTPUT POWER
2 ohms - 1250W x 2
4 ohms - 900W x 2
8 ohms - 540w x 2

BRIDGE MODE MONO
4 ohms - 2500W
8 ohms - 1800W

Specification:


Power Supply: 240v

Dimensions:483 x 90 x 380mm

Weight: 23 kgs